THE CUBE^® Series Design

No other coalescing media package compares to "THE CUBE":
"THE CUBE" Coalescing Media Pack – 90 ft.2 per ft.3
Tube Type Coalescing Media – 45 ft.2 per ft.3 (est.)
Black Type Coalescing Media – 45 ft.2 per ft.3 (est.)

When certain materials are placed in the wastewater flow, removal efficiencies of oil increase due to impingement on their surface. Plastic media is particularly effective because of its oleophilic (oil attracting) characteristics. As fine oil droplets impinge upon or pass close to the plastic surface, they are attracted to it and adhere. Additional droplets continue to be attracted and coalesce or merge with previous droplets to produce much larger droplets. At a point, the droplets are large enough to break free and rise rapidly to the surface where they are skimmed or decanted. This coalescing action allows removal of smaller droplets than is possible with a straight gravity separator.
 
 

 
 
The effectiveness of any particular coalescing media is governed by several variables: density, available surface area, velocity, and direction of flow and shape of the media. All of these variables influence the potential contact area, so it becomes of particular importance to form the media properly to maximize contact while minimizing blinding. "THE CUBE" media pack was designed with consideration of all these factors. "THE CUBE" media pack provides greater coalescing and solids separation area than any other media currently available. "THE CUBE's" patented shape and specific spacing of the plates provides maximum protection from blinding, while providing a tortuous path through which the water must pass. This continuous change of direction insures a high level of oil droplet contact on the cube surface with resultant coalescence and oil removal.

For more information on THE CUBE^® Oil / Water Separator, simply complete our HOH Quick Response Form and fax it to 336.727.8840.

Viewing requires the free Adobe Acrobat Reader.
If you experience problems viewing or printing this PDF file, try saving the file to your disk before opening it.